Volkswagen ID.4: Removing and Fitting the Wheel Bolt Caps

Removing the Caps

Fig. 1 Remove the caps from the wheel bolts.

The caps are for protecting the wheel bolts and must be completely reattached after a wheel change.

1. Take the extraction hook out of the vehicle tool kit (→ Vehicle tool kit).

2. Insert the extraction hook into the opening in the cap.

3. Remove the cap with extraction hook in the direction of the arrow→ fig. 1.

Putting on Caps

1. Push the cap all the way onto the wheel bolts.

The anti-theft wheel bolt has a separate cap. This cap only fits on the anti-theft wheel bolt and not on conventional wheel bolts.

Removing and Fitting Wheel Hub CoversLoosening wheel bolts