Volkswagen ID.4: Setting a 360º range display and Electric Vehicle Route Planner

Range 360 display

The Range 360 view shows the possible range based on the current charge level in the high-voltage battery.

The image only displays an estimated range, taking into consideration current consumption values. The image may change during the journey and the upper and lower limits of the range must be seen as an estimate.

Activating and Deactivating the 360º Range Display

1. Tap .

To show the complete range display on the map, adjust the map view if necessary (→ Navigation).

Electric Vehicle Route Planner

A maximum of five charging stations can be added automatically as charging stops.

You can specify the preferred payment type at charging stations in the dialog box with route options (→ Navigation).

If your preferred payment type is not available at one or several charging stations, audible information is provided.

Depending on what you have selected and the available data, suitable charging stations are displayed on the map and prioritized in the itinerary.

In the dialog box with route options, you can also set your preferred remaining range with which you would like to arrive at the charging stations along the route and at the destination (→ Navigation). What is entered here influences the automatic planning for charging stations required along the route.

The settings in the "Charging to the maximum battery charge level" menu can be temporarily overwritten by the "Electric Vehicle Route Planner" function (→ Charging settings).

After completion of route guidance, the settings in the "Charging to the maximum battery charge level" menu will be used again.

The current occupation status of charging stations, if available, is shown in the Infotainment system if there is an active Internet connection (→ Navigation). The current status is displayed with a colored dot at the edge of the symbol.

Automatically adding charging stops

1. In the navigation settings, tap (→ Navigation) Route guidance Route options Add charging stops automatically and activate it to activate the automatic scheduling of necessary charging stations along the route.

Selecting alternative charging stations

With planned routes, you can select alternative charging stations instead of the ones automatically mapped along the route.

1. Enter or select your preferred destination.

2. Tap Start.

3. Open route plan.

4. Tap a scheduled charging station in the route plan.

Details of the planned charging station are displayed.

5. Tap Display further charging stations.

The positions of further charging stations nearby are displayed on the map.

6. Tap an alternative charging station nearby on the map or in the list.

Details of the alternative charging station are displayed.

7. Tap Add destination as a stopover.

The charging station previously planned in is replaced by the newly selected charging station and the route is adjusted.

If Add as a stopover is selected, the selected charging station is retained even if the route is changed.

Searching for Charging Stations with a Filter

Various criteria can be set to search for charging stations on the map or in the search results of the "Charging station" category. If a criterion is set, this has an effect on the presentation on the map. Only the charging stations corresponding to the criteria are displayed. The search results for the "Charging station" category are filtered according to the selected criteria. The criteria can be changed again at any time. An active filter has no influence on route planning. To consider charging stops in route planning, adjust the settings.

An active filter is displayed by a colored dot in the dialog box (→ Navigation).

Inputting destinations and starting route guidanceNavigation data