Volkswagen ID.4: Fitting locations

• Overview of fitting locations - senders, sensors and control units, ID.4
• Overview of fitting locations - senders, sensors and control units, ID.5

Overview of fitting locations - senders, sensors and control units, ID.4

Safety information and repair notes

Safety information

Observe safety information ⇒ Safety information and repair notes; Rep. gr. 00; Safety information.

Repair instructions

Observe repair instructions ⇒ Safety and repair instructions; Rep. gr. 00; Repair instructions.

Fitting locations

Overview of fitting locations - senders, sensors and control units, ID.4

Overview of fitting locations - senders, sensors and control units in front section of vehicle

The overview shows a left-hand drive vehicle as an example

1. Adaptive cruise control unit -J428-

• ⇒ Rep. gr. 98; Removing and installing adaptive cruise control unit J428
• ⇒ Rep. gr. 98; Adjusting/ calibrating adaptive cruise control unit

2. Front overhead view camera -R243

• ⇒ Rep. gr. 98; Removing and installing front overhead view camera R243
• ⇒ Rep. gr. 98; Calibrating overhead view camera system

3. Front left sender for park assist steering on left side of vehicle -G568-

• ⇒ Rep. gr. 98; Removing and installing front park assist steering senders G568/G569

4. Front left parking aid sender -G255-

• ⇒ Rep. gr. 98; Removing and installing front parking aid senders G252/G253/G254/ G255

5. Front inner left parking aid sender -G254-

• ⇒ Rep. gr. 98; Removing and installing front parking aid senders G252/G253/G254/G255

6. Front inner right parking aid sender -G253-

• ⇒ Rep. gr. 98; Removing and installing front parking aid senders G252/G253/G254/G255

7. Front right parking aid sender -G252-

• ⇒ Rep. gr. 98; Removing and installing front parking aid senders G252/G253/G254/G255

8. Front right sender for park assist steering on right side of vehicle -G569-

• ⇒ Rep. gr. 98; Removing and installing front park assist steering senders G568/G569

Overview of fitting locations - senders, sensors and control units in centre section of vehicle

The overview shows a left-hand drive vehicle as an example

1. Right overhead view camera -R245-

• ⇒ Rep. gr. 98; Removing and installing right/ left overhead view camera R244/R245
• ⇒ Rep. gr. 98; Calibrating overhead view camera system

2. Lane change assist warning lamp in right exterior mirror -K311-

• ⇒ Rep. gr. 98; Removing and installing lane change assist warning lamp in exterior mirror [K311]/[K312]

3. Front camera for driver assist systems -R242- and windscreen heater for front sensors -Z113-

• ⇒ Rep. gr. 98; Removing and installing front camera for driver assist systems [R242]
• ⇒ Rep. gr. 98; Calibrating front camera for driver assist systems [R242]
• ⇒ Rep. gr. 98; Removing and installing windscreen heater for front sensors [Z113]

4. Lane change assist warning lamp in left exterior mirror -K312-

• ⇒ Rep. gr. 98; Removing and installing lane change assist warning lamp in exterior mirror [K311]/[K312]

5. Overhead view camera control unit -J928-

• Rep. gr. 98; Removing and installing control unit for overhead view camera [J928]
•  ⇒ Rep. gr. 98; Removing and installing holder for control unit for overhead view camera [J928]
• ⇒ Rep. gr. 98; Calibrating overhead view camera system

6. Left overhead view camera -R244-

• ⇒ Rep. gr. 98; Removing and installing right/left overhead view camera R244/R245
• ⇒ Rep. gr. 98; Calibrating overhead view camera system

Overview of fitting locations - senders, sensors and control units in rear section of vehicle

The overview shows a left-hand drive vehicle as an example

1. Roof aerial -RX5-

1. Roof aerial -RX5-

• With GPS aerial -R50-
• With auxiliary heater aerial -R182-
• With GSM aerial - R205-
• Depending on equipment/ version
• ⇒ Communication; Rep. gr. 91; Components/ control units; Removing and installing roof aerial [RX5]

2. Parking aid control unit - J446-

• ⇒ Rep. gr. 98; Removing and installing parking aid control unit [J446]

3. Rear right park assist steering sender -G717-

• ⇒ Rep. gr. 98; Removing and installing rear park assist steering senders [G716]/[G717]

4. Lane change assist control unit -J769-

• Master control unit
• ⇒ Rep. gr. 98; Removing and installing lane change assist control unit [J769]/[J770]

5. Rear right parking aid sender -G206-

• ⇒ Rep. gr. 98; Removing and installing rear parking aid senders [G203]/[G204]/[G205]/[G206]

6. Rear centre right parking aid sender -G205-

• ⇒ Rep. gr. 98; Removing and installing rear parking aid senders [G203]/[G204]/[G205]/[G206]

7. Rear lid handle release button -E234-

• Depending on equipment/version
• With reversing camera -R189- and reversing camera system control unit -J772-
• with rear overhead view camera -R246-
• ⇒ Rep. gr. 98; Removing and installing reversing camera [R189]
• ⇒ Rep. gr. 98; Removing and installing rear overhead view camera [R246]
• ⇒ Rep. gr. 98; Calibrating overhead view camera system

8. Rear centre left parking aid sender -G204-

• ⇒ Rep. gr. 98; Removing and installing rear parking aid senders [G203]/[G204]/[G205]/[G206]

9. Rear left parking aid sender -G203-

• ⇒ Rep. gr. 98; Removing and installing rear parking aid senders [G203]/[G204]/[G205]/[G206]

10. Lane change assist control unit 2 -J770-

• Slave control unit
• ⇒ Rep. gr. 98; Removing and installing lane change assist control unit [J769]/[J770]

11. Rear left park assist steering sender -G716-

• ⇒ Rep. gr. 98; Removing and installing rear park assist steering senders [G716]/[G717]

Overview of fitting locations - senders, sensors and control units, ID.5

Overview of fitting locations - senders, sensors and control units in front section of vehicle

The overview shows a left-hand drive vehicle as an example

1. Adaptive cruise control unit -J428-

• ⇒ Rep. gr. 98; Removing and installing adaptive cruise control unit J428
• ⇒ Rep. gr. 98; Adjusting/ calibrating adaptive cruise control unit

2. Front overhead view camera -R243-

• ⇒ Rep. gr. 98; Removing and installing front overhead view camera R243
• ⇒ Rep. gr. 98; Calibrating overhead view camera system

3. Front left sender for park assist steering on left side of vehicle -G568-

• ⇒ Rep. gr. 98; Removing and installing front park assist steering senders G568/G569

4. Front left parking aid sender -G255-

• ⇒ Rep. gr. 98; Removing and installing front parking aid senders G252/G253/G254/ G255

5. Front inner left parking aid sender -G254-

• ⇒ Rep. gr. 98; Removing and installing front parking aid senders G252/G253/G254/G255

6. Front inner right parking aid sender -G253-

• ⇒ Rep. gr. 98; Removing and installing front parking aid senders G252/G253/G254/G255

7. Front right parking aid sender -G252-

• ⇒ Rep. gr. 98; Removing and installing front parking aid senders G252/G253/G254/G255

8. Front right sender for park assist steering on right side of vehicle -G569-

• ⇒ Rep. gr. 98; Removing and installing front park assist steering senders G568/G569

Overview of fitting locations - senders, sensors and control units in centre section of vehicle

The overview shows a left-hand drive vehicle as an example

1. Right overhead view camera -R245-

• ⇒ Rep. gr. 98; Removing and installing right/ left overhead view camera R244/R245
• ⇒ Rep. gr. 98; Calibrating overhead view camera system

2. Lane change assist warning lamp in right exterior mirror -K311

• ⇒ Rep. gr. 98; Removing and installing lane change assist warning lamp in exterior mirror [K311]/[K312]

3. Front camera for driver assist systems -R242- and windscreen heater for front sensors -Z113-

• ⇒ Rep. gr. 98; Removing and installing front camera for driver assist systems [R242]
• ⇒ Rep. gr. 98; Calibrating front camera for driver assist systems [R242]
• ⇒ Rep. gr. 98; Removing and installing windscreen heater for front sensors [Z113]

4. Lane change assist warning lamp in left exterior mirror -K312-

• ⇒ Rep. gr. 98; Removing and installing lane change assist warning lamp in exterior mirror [K311]/[K312]

5. Overhead view camera control unit -J928-

• ⇒ Rep. gr. 98; Removing and installing control unit for overhead view camera [J928]
• ⇒ Rep. gr. 98; Removing and installing holder for control unit for overhead view camera [J928]
• ⇒ Rep. gr. 98; Calibrating overhead view camera system

6. Left overhead view camera -R244-

• ⇒ Rep. gr. 98; Removing and installing right/left overhead view camera R244/R245
•  ⇒ Rep. gr. 98; Calibrating overhead view camera system

Overview of fitting locations - senders, sensors and control units in rearsection of vehicle

The overview shows a left-hand drive vehicle as an example

1. Roof aerial -RX5-

• With external vehicle communication aerial - R387-
• With GPS aerial -R50-
• With GSM aerial - R205-
• With LTE aerial 1 - R297-
• Depending on equipment/ version
• ⇒ Communication; Rep. gr. 91; Components/ control units; Removing and installing roof aerial [RX5]

2. Parking aid control unit - J446-

• ⇒ Rep. gr. 98; Removing and installing parking aid control unit [J446]

3. Rear right park assist steering sender -G717-

• ⇒ Rep. gr. 98; Removing and installing rear park assist steering senders [G716]/[G717]

4. Lane change assist control unit -J769-

• Master control unit
• ⇒ Rep. gr. 98; Removing and installing lane change assist control unit [J769]/[J770]

5. Rear right parking aid sender -G206-

• ⇒ Rep. gr. 98; Removing and installing rear parking aid senders [G203]/[G204]/[G205]/[G206]

6. Rear centre right parking aid sender -G205-

• ⇒ Rep. gr. 98; Removing and installing rear parking aid senders [G203]/[G204]/[G205]/[G206]

7. Rear lid handle release button -E234-

• With reversing camera -R189- and reversing camera system control unit -J772-
• with rear overhead view camera -R246-
• Depending on equipment/version
• ⇒ Rep. gr. 98; Removing and installing reversing camera [R189]
• ⇒ Rep. gr. 98; Calibrating reversing camera R189
• ⇒ Rep. gr. 98; Removing and installing rear overhead view camera [R246]
• ⇒ Rep. gr. 98; Calibrating overhead view camera system

8. Rear centre left parking aid sender -G204-

• ⇒ Rep. gr. 98; Removing and installing rear parking aid senders [G203]/[G204]/[G205]/[G206]

9. Rear left parking aid sender -G203-

• ⇒ Rep. gr. 98; Removing and installing rear parking aid senders [G203]/[G204]/[G205]/[G206]

10. Lane change assist control unit 2 -J770-

• Slave control unit
• ⇒ Rep. gr. 98; Removing and installing lane change assist control unit [J769]/[J770]

11. Rear left park assist steering sender -G716-

• ⇒ Rep. gr. 98; Removing and installing rear park assist steering senders [G716]/[G717]